Garmin eTrex
Par PlaceOweb le dimanche, mai 3 2009, 14:19 - Logiciels - Lien permanent
Le GPS eTrex par Garmin
Garmin eTrex
Le GPS Garmin eTrex :
- GPS à 12 canaux parallèles de l'eTrex capte rapidement les signaux satellites et qu'il les maintient avec précision
- 2 petites piles, pouvant durer jusqu'à 22 heures...
- eTrex vous montre la direction à suivre (aucune carte du terrain ni des rues)
On trouve ce produit dans la section Randonnée » Tous les produits Randonnée » Produits arrêtés
Et on peut télécharger la fiche produit du Garmin eTrex
Spécifications: |
|
| Dimensions de l'appareil, L × H × P: | 11.2 x 5.1 x 3.0 cm |
| Taille de l'écran, L × H: | 2.8 x 5.4 cm |
| Résolution de l'écran, L × H: | 64 x 128 pixels |
| Type d'écran: | LCD monochrome à fort contraste |
| Poids: | 150 g avec piles |
| Batterie: | 2 piles AA (non fournies) |
| Autonomie de la batterie: | 22 heures |
| Etanche: | oui (IPX7) |
| Flotte: | non |
| Récepteur haute sensibilité: | non |
| Interface PC: | serial |
| Version RoHS disponible: | oui |
Cartes et mémoire: |
|
| Carte de base: | non |
| Cartes préchargées: | non |
| Possibilité d'ajouter des cartes: | non |
| Mémoire intégrée: | non |
| Accepte les cartes mémoire: | non |
| Waypoints: | 500 waypoints avec noms et symboles graphiques |
| Itinéraires: | 20 |
| Journal de suivi: | 10 00 points de trace, 10 routes mémorisables |
Fonctions: |
|
| Définition automatique d'itinéraires (fonction d'itinéraire virage par virage): | non |
| Boussole électronique: | non |
| Altimètre barométrique: | non |
| Mode Geocache: | non |
| Jeux GPS en extérieur: | non |
| Calendrier de chasse/pêche: | oui |
| Informations lune/soleil: | oui |
| Tableau des marées: | non |
| Calcul de zone: | non |
| Points d'intérêt personnalisés (possibilité d'ajouter des points d'intérêt supplémentaires): | non |
| Transfert d'appareil à appareil (partage sans fil des données des appareils similaires): | non |
| Visionneuse JPEG: | non |
Vérifier que mon appareil possède les dernières versions logiciels et mettre à jour le logiciel interne (firmware) d'un produit
WebUpdater est une application gratuite qui vous permet de mettre à jour le logiciel de votre appareil Garmin. Téléchargez la dernière version de l'application à partir du lien ci-dessous, et vous pourrez ainsi vérifier et installer les dernières mises à jour logiciel automatiquement sans passer par votre navigateur Internet.
Pour le Garmin eTrex, la dernière version firmware est la 2.2 et date du 30 juillet 2003.
ChangeLog
Changes from version 2.09 to version 2.20:
- Removed the potential for shutdown when navigating a route with points placed close to one another.
- Updated French translations.
Changes from version 2.08 to version 2.09:
- Software modifications to support hardware change. No noticeable change to user.
Changes from version 2.07 to version 2.08:
- Software modifications to support hardware change. No noticeable change to user.
Changes from version 2.06 to version 2.07:
- Added Turkish, Croatian, and Hungarian languages.
- Added RT 90 position format.
- Added Croatian map datum.
Changes from version 2.05 to version 2.06:
- Correct MGRS position format editing.
- Added 5:45 'other' time offset to accommodate Nepal time zone.
Changes from version 2.04 to version 2.05:
- Added Polish and Czech languages.
Changes from version 2.03 to version 2.04:
- Added Hunt / Fish outlook page and Sun / Moon outlook page.
- Added NMEA in waypoint upload support.
- Added MILS angle display support.
- Added India grid support.
- Prevent excessive number of track points from being created.
Changes from version 2.02 to version 2.03:
- Added an Advanced Skyview mode on the GPS page that displays the location in the sky of each satellite that the unit is tracking. Along with this skyview is the signal strength for each satellite. To get to this new mode, press the ENTER key while on the GPS page. An option menu will appear. This option menu contains two items: SETUP DISPLAY and ADVANCED SKYVIEW. The SETUP DISPLAY option will take you to the Display Setup page for adjusting contrast and light controls. Selecting the ADVANCED SKYVIEW option will switch the GPS page to display the advanced skyview information.
- Allow display of speed and track when velocity is below 1.0 MPH and selective availability is off.
- Fixed route leg distance calculation that occurred when the unit did not have a fix.
- Fixed Dutch grid conversions and added new Dutch map datum to accompany the Dutch grid.
- The map datum list on the Units Setup page is now displayed alphabetically.
- Added Dutch and Finnish languages.
Changes from version 2.01 to version 2.02:
- New user configurable north reference offset that can be modified on the units setup page.
- New project waypoint feature that allows you to create waypoints from existing waypoints given a distance a bearing.
- New hide/show waypoints feature on the Map page that is accessed from the option menu.
- Editing the location of a waypoint is now displayed correctly.
- Added PVT output support.
- Fixed rare memory anomaly caused by uncontrolled shutdown.
- Added bearing and distance to the map when viewing a waypoint from the Review Waypoint page.
- The elevation on the Review Waypoint page can now be modified.
- Added more time zones. Note: Daylight savings needs to be turned on/off manually for time zones out of the United States.
- More zoom levels on the Map page.
- New display option on the Map page for the Goto navigational line. The line can be displayed from your current position (default) or from your original point of navigation as a course line. This option can be changed from the Map page's option menu by selecting 'SHOW BEARING LINE' (default) or 'SHOW COURSE LINE'.
- The UTC label is no longer displayed on the time when the UTC offset is zero.
- The user selected north reference offset is saved correctly.
- The restore defaults button on the units setup page saves the defaults correctly.
- Elevation is no longer displayed in kilometers or kilofeet when exceeding 1,000. It now remains in meters or feet.
- Shortened the Australian grid abbreviations.
- Improvements in positioning to fix erroneous track logs.
- Improved the arrival alarm.
- Changed the meter unit symbol from 'mt' to 'm' to be consistent with international standards.
Changes from version 2.00 to version 2.01:
- The Goto line on the map is displayed correctly from your current position.
- The power-on page indicates that this unit has multiple language support.